ROLLER

This article appears in Volume V23, Page 467 of the Encyclopedia Britannica.

Encyclopedia Britannica - Main :: RHY-RON

ROLLER . For agricultural purposes the roller formerly consisted of a solid cylinder of timber or stone attached to a frame and shafts, but to facilitate turning two or more iron cylinders revolving on an axle are now generally used. The simplest form has a smooth surface. The

diameter

DIAMETER (from the Cr. &a, through, µErpov, measure)

of the drum should be as great as possible3o in. being a good sizebecause the larger this is the more easily it is pulled (within certain limits), while rollers of small

diameter

DIAMETER (from the Cr. &a, through, µErpov, measure)

are heavier of draught and do their work less efficiently. The implement is used in

spring

SPRING (from " to spring," " to leap or jump up," " burst out," O. Eng., springau, a common Teut. word, cf. Ger. springer, possibly allied to Gr. QnrFpxecOac, to move rapidly)

and summer as an aid in pulverizing and cleaning the soil, by bruising clods and lumps of tangled roots and earth which the

cultivator

CULTIVATOR

or other implement has brought to the surface; in smoothing the surface for the reception of small seeds or the better operation of the mower or reaper; in consolidating soil that is too loose in texture and pressing it down about the roots of young plants. In the case of young plants the roots are close to the surface, which must therefore be kept moist. This end is attained by the compression by the roller of the top-soil of which the capillarity, i.e. the power of drawing water from the sub-soil is thereby increased. On the other hand, when it is desired to conserve the soil-moisture, the roller may be followed by the harrow, which, by pulverizing the surface-soil, breaks the capillarity. Of the variations on the common smooth roller, the clod-crusher and the

Cambridge

roller are the most important. The clod-crusher combines weight with breaking power. The best-known form was patented about 1841 by Crosskill, and consists of a number of disks with serrated edges threaded loosely on an axle round which they revolve. The

Cambridge

roller carries on its axle a number of closely packed wheels, the rims of which narrow down to a wedge shape. The tubular roller, instead of drums, has tubes arranged longitudinally, producing a corrugated surface which is reproduced in the condition of the soil after it has been rolled.
ROLLER-SKATING, a pastime which, by the use of small wheels instead of a blade on the skate, has provided some of the pleasures of skating on ice without having ice as the surface (see SKATING). Wheeled skates were used on the roads of Holland as far back as the 18th century, but it was the invention of the four-wheeled skate, working on rubber springs, by J. L. Plimpton of New

York

, in 1863, that made the amusement popular. Still greater advance was made by the Raymond skate with ball and

cone

CONE (Gr. Kwvos)

bearings. The wheels or rollers were first of turned boxwood, but the wearing of the edges was a fault which has been surmounted by making them of a hard composition or of steel. The floor of the rink on which the skating takes place is either of asphalt or of wood. The latter is that always used in newly made rinks. The best floors are of long narrow strips of maple. Figure-skating on roller-skates is in some respects easier to learn than on ice-skates, the four points of contact given by the wheels rendering easier the holding of an edge; but some figures, such as loops, are more difficult.

End of Article: ROLLER

If you wish, you can link directly to this article.

<a href="http://jcsm.org/StudyCenter/Encyclopedia/RHY_RON/ROLLER.html">
ROLLER
</a>

(Previous)
ROLLE DE HAMPOLE, RICHARD (d. 1349)

(Next)
ROLLIN, CHARLES (1661-1741)

JCSM was founded in 1997 and exists to help the community and bring people into a life-changing and productive relationship with Jesus Christ. JCSM offers over 200,000 free web pages, including its weekly inspirational emails that were sent continuously for over a decade.

Jesus Christ Saves Ministries
P.O. Box 9297
San Diego, CA 92169
1-888-887-0417 or Email