|
|
![]() Helping San Diego, California and beyond since 1997.
|
|
Click here and add this page to your favorites!

|
Encyclopedia Britannica - Main :: COM-COR |
|
|
CONIC SECTION , or briefly CONIC, a curve in which a plane intersects a cone. In ancient geometry the name was restricted to the three particular forms now designated the ellipse, parabola
parabola
focus ) and a fixed line (the directrix) are in constant ratio. This ratio, known as the eccentricity, determines the nature of the curve; if it be greater than unity, the conic is a hyperbola; if equal to unity, a parabola; and if less than unity, an ellipse. In the case of the circle, the centre is the focus , and the line at infinity the directrix; we therefore see that a circle is a conic of zero eccentricity.In projective geometry it is convenient to define a conic section as the projection of a circle. The particular conic into which the circle is projected depends upon the relation of the " vanishing line " to the circle; if it intersects it in real points, then the projection is a hyperbola, if in imaginary points an ellipse, and if it touches the circle, the projection is a parabola. These results may be put in another way, viz. the line at infinity intersects the hyperbola in real points, the ellipse in imaginary points, and the parabola in coincident real points. A conic may also be regarded as the polar reciprocal of a circle for a point;if the point be without the circle the conic is an ellipse, if on the circle a parabola, and if within the circle a hyperbola. In analytical geometry the conic is represented by an algebraic equation of the second degree, and the species of conic is solely determined by means of certain relations between the coefficients. Confocal conics are conics having the same foci. If one of the foci be at infinity, the conics are confocal parabolas, which may also be regarded as parabolas having a common focus and axis. An important property of confocal systems is that only two confocals can be drawn
The definitions given above reflect the intimate association of these curves, but it frequently happens that a particular conic is defined by some special property (as the ellipse, which is the locus of a point such that the sum of its distances from two . fixed points is constant); such definitions and other special properties are treated in the articles ELLIPSE, HYPERBOLA and PARABOLA. In this article we shall consider the historical development of the geometry of conics, and refer the reader to the article GEOMETRY: Analytical and Projective, for the special methods of investigation. History.The invention of the conic sections is to be assigned to the school of geometers founded by Plato at Athens about the 4th century B.C. Under the guidance and inspiration of this philosopher much attention was given to the geometry of solids, and it is probable that while investigating the cone, Menaechmus, an associate of Plato, pupil of Eudoxus, and brother of Dino-stratus (the inventor of the quadratrix), discovered and investigated the various curves made by truncating a cone. Menaechmus discussed three species of cones (distinguished by the magnitude of the vertical angle as obtuse-angled, right-angled and acute-angled), and the only section he treated was that made by a plane perpendicular to a generator of the cone; according to the species of the cone, he obtained the curves now known as the hyperbola, parabola and ellipse. That he made considerable progress in the study of these curves is evidenced by Eutocius, who flourished about the 6th century A.D., and who assigns to Menaechmus two solutions of the problem of duplicating the cube b'y means of intersecting conics. On the authority of the two great commentators Pappus and Proclus, Euclid wrote four books on conics, but the originals are now lost, and all we have is chiefly to be found in the works of Apollonius of Perga. Archimedes contributed to the knowledge of these curves by determining the area of the parabola, giving both a geometrical and a mechanical solution, and also by evaluating the ratio of elliptic to circular spaces. He probably wrote a book on conics, but it is now lost. In his extant Conoids and Spheroids he defines a conoid to be the solid formed by the revolution of the parabola and hyperbola about its axis, and a spheroid to be formed similarly from the ellipse; these solids he discussed with great acumen, and effected their cubature by his famous " method of exhaustions." But the greatest Greek writer on the conic sections was Apollonius of Perga, and it is to his Conic Sections that we are indebted for a review of the early history of this subject. Of the eight books which made up his original treatise, only seven are certainly known, the first four in the original Greek, the next three are found in Arabic translations, and the eighth was restored by Edmund Halley in 1710 from certain introductory lemmas of Pappus. The first four books, of which the first three are dedicated to Eudemus, a pupil of Aristotle and author of the original Eudemian Summary, contain little that is original, and are principally based on the earlier works of Menaechmus, Aristaeus (probably a senior contemporary of Euclid, flourishing about a century later than Menaechmus), Euclid and Archimedes. The remaining books are strikingly original and are to:be regarded as embracing Apollonius's own researches. The first book, which is almost entirely concerned with the construction of the three conic sections, contains one of the most brilliant of all the discoveries of Apollonius. Prior to his time, a right cone of a definite vertical angle was required for the generation of any particular conic; Apollonius showed that the sections could all be produced from one and the same cone, which may be either right or oblique, by simply varying the inclination of the cutting plane. The importance of this generalization cannot be overestimated; it is of more than historical interest
interpolation .We may now summarize the contents of the Conics of Apollonius. The first book deals with the generation of the three conics; the second with the asymptotes, axes and diameters; the third with various metrical relations between transversals, chords, tangents, asymptotes, &c.; the fourth with the theory of the pole and polar, including the harmonic division of a straight line, and with systems of two conics, which he shows to intersect in not more than four points; he also investigates conics having single and double contact. The fifth book contains properties of normals and their envelopes, thus embracing the germs of the theory of evolutes, and also maxima and minima problems, such as to draw the longest and shortest lines from a given point to a conic; the sixth
The Conics of Apollonius was translated into Arabic by Tobit ben Korra in the gth century, and this edition was followed by Halley in 1710. Although the Arabs were in full possession of the store of knowledge of the geometry of conics which the Greeks had accumulated, they did little to increase it; the' only advance made consisted in the application of describing intersecting conics so as to solve algebraic equations. The greatpioneer in this field was Omar Khayyam, who flourished in the 11th century. These discoveries were unknown in western Europe for many centuries, and were re-invented aid developed by many European mathematicians. In 1522 there was published an original work on conics by Johann Werner of Nuremburg. This work, the earliest published in Christian Europe, treats the conic sections in relation to the original cone, the procedure differing from that of the Greek geometers. Werner was followed by Franciscus Maurolycus of Messina, who adopted the same method, and added considerably to the discoveries of Apollonius. Claude Mydorge (15851647), a French geometer and friend of Descartes, published a work De sectionibus conicis in which he greatly simplified the cumbrous proofs of Apollonius, whose method of treatment he followed.Johann Kepler (15711630) made many important discoveries in the geometry of conics. Of supreme importance is the fertile conception of the planets revolving about the sun in elliptic orbits. On this is based the great structure of celestial
An important generalization of the conic sections was developed about the beginning of the 17th century by Girard Desargues and Blaise Pascal. Since all conics derived from a circular cone appear circular when viewed from the apex, they conceived the treatment of the conic sections as projections of a circle. From this conception all the properties of conics can be deduced. Desargues has a special claim to fame on account of his beautiful theorem on the involution of a quadrangle inscribed in a conic. Pascal discovered a striking property of a hexagon inscribed in a conic (the hexagrammum mysticum); from this theorem Pascal is said to have deduced over 400 corollaries, including most of the results obtained by earlier geometers. This subject is mathematically discussed in the article GEOMETRY: Projective. While Desargues and Pascal were founding modern synthetic geometry, Rene Descartes was developing the algebraic representation of geometric relations. The subject of analytical geometry which he virtually created enabled him to view the conic sections as algebraic equations of the second degree, the form of the section depending solely on the coefficients. This method rivals in elegance all other methods; problems are investigated by purely algebraic means, and generalizations discovered which elevate the method to a position of paramount importance. John Wallis, in addition to translating the Conics of Apollonius, published in 1655 an original work entitled De sectionibus conicis nova methodo expositis, in which he treated the curves by the Cartesian method, and derived their properties from the definition in piano, completely ignoring the connexion between the conic sections and a cone. The analytical method was also followed by G. F. A. de l'HSpital in his Traite analytique des sections coniques (1707). A mathematical investigation of the conics by this method is given in the article GEOMETRY: Analytical. Philippe de la Hire, a pupil of Desargues, wrote several works on the conic sections, of which the most important is his Sectiones Conicae (1685). His treatment is synthetic, and he follows his tutor and Pascal in deducing the properties of conics by projection from a circle. A method of generating conics essentially the same as our modern method of homographic pencils was discussed by Jan de Witt in his Elementa linearum curvarum (165o); but he treated the curves by the Cartesian method, and not synthetically. Similar methods were devised by Sir Isaac Newton and Colin Maclaurin. In Newton's method, two angles of constant magnitude are caused to revolve about. their vertices which are fixed in position, in such a manner that the intersection of two limbs moves along a fixed straight line; then the two remaining limbs envelop a conic. Maclaurin's method, published in his Geometria organica (1719), is based on the proposition that the locus of the vertex of a triangle, the sides of which pass through three fixed points, and the base angles move along two fixed lines, is a conic section. Both Newton's and Maclaurin's methods have been developed by Michel Chasles. In modern times the study of the conic sections has proceeded along the lines which we have indicated; for further details reference should be made to the article GEOMETRY. Geometrical constructions are treated in T. H. Eagles, Constructive Geometry of Plane Curves (1886); geometric investigations primarily based on the relation of the conic sections to a cone are given in Hugo Hamilton's De Sectionibus Conicis (1758); this method of treatment has been largely replaced by considering the curves from their definition in piano, and then passing to their derivation from the cone and cylinder. This method is followed in most modern works. Of such text-books there is an ever-increasing number; here we may notice W. H. Besant, Geometrical Conic Sections; C. Smith, Geometrical Conics; W. H. Drew, Geometrical Treatise on Conic Sections. Reference may also be made to C. Taylor, An Introduction to Ancient and Modern Geometry of Conics (i881). See also list
End of Article: CONIC SECTION If you wish, you can link directly to this article.
<a href="http://jcsm.org/StudyCenter/Encyclopedia/COM_COR/CONIC_SECTION.html"> CONIC SECTION </a> |
|
|
(Previous) CONIBOS, or MANOAS |
(Next) CONIFEISALES |
|
Sponsored Advertisements